HIMA
HIMA Front connector Z7108
Home > HIMA > I/O Accessories > Z7108 Need HIMA Z7108? Front connector for HIMA HIQuad X, HIMax safety I/O systems. Supplied with full traceability an…
Specifications
| Brand | HIMA |
|---|---|
| Model Number | Z7108 |
| Official Product Name | Z 7108 Front Connector / Cable Plug |
| Applicable System | HIMA HIQuad X, HIMax safety I/O systems |
| Product Type | Front connector / cable plug |
| Equivalent Standard | Contact us for cross-reference and alternative models |
| Product Status | In Stock |
| Compatible Modules | HIMA F3237, F3330 and other HIQuad X / HIMax I/O modules |
| System Slot Width | 4 TE |
| Mounting | Control-cabinet, rack front |
| Ingress Protection | IP20 |
| Operating Temperature | -20 to +60 C (reference) |
| Connection Type | Front connector / cable plug for HIMA safety I/O modules |
Product Description
It provides the pre-terminated connection interface that seats onto the module faceplate and routes sensor or actuator wiring to the backplane. Built for control-cabinet mounting, it carries the channel markings and coding needed for correct, error-free installation in safety-rated racks. The HIMA Z 7108 is the front connector / cable plug used to wire field signals into HIMA HIQuad X and HIMax safety I/O modules such as the F3237 and F3330.
Basic Product Information
- Signal interface routing field wiring to the module backplane
- Keyed / coded design prevents mis-mating with adjacent safety modules
- Designed for 4 TE rack slots; control-cabinet (IP20) installation
- Pre-terminated front connector for HIMA safety I/O modules (HIQuad X, HIMax)
Technical Specifications
Version & Model Difference
The Z 7108 is the front connector referenced as 'Z 7108/3237/C5' when bundled with HIMA input modules; it is an accessory rather than a processing module. Pin and coding match the paired module faceplate.
Application Scenarios
- Field wiring termination for HIMA safety input and output modules in ESD/SIS racks
- Signal harness build for HIQuad X and HIMax safety control cabinets
- Spare connector for maintenance and module hot-swap replacement
- HIMA F3 DIO 8/8 01 Safety Digital I/O Module
- HIMA F3237 8-Channel NAMUR Safety Input Module
- HIMA F3330 8-Channel Safety Digital Output Module
- HIMA Z7138 Cable Plug / Terminal Board for F3330 & F3331 Safety Output Modules
Frequently Asked Questions
What is the HIMA Z7108 used for?
It is the front connector / cable plug that terminates field wiring onto HIMA HIQuad X and HIMax safety I/O modules such as the F3237 and F3330.
Which modules use the Z7108 connector?
It is used with HIMA safety input and output modules in the HIQuad X and HIMax families; confirm the exact plug variant with your module's datasheet.
Is the Z7108 a standalone controller?
No. It is a wiring accessory, not a processing module, and must be paired with its compatible HIMA I/O module.
What environmental rating applies?
The connector is intended for control-cabinet installation with an IP20 rating; verify operating temperature against the specific module it serves.
Need Z7108-plug?
Get a Quote in Minutes.
12-month warranty · No MOQ · Worldwide shipping with tracking
Request a Quote
Get the latest price, stock status and bulk order discount for Z7108-plug. Our team replies within 30 minutes (working hours).