Home Products Solutions Selection Guide About Us Blog Contact Us Get a Quote →
East Electric · PLC Module

East Electric SYJ primary plug-in contact SY J-16-63.3

SY-J-16-633

East Electric East Electric

East Electric SYJ primary plug-in contact SY J-16-63.3

East Electric SY J-16-63.3 SYJ primary plug-in contact. For GCS and MNS low-voltage withdrawable switchgear. Supplied with full traceability and documentation. …

$16.91
Availability on request

Quoted price from our sales team

Specifications

BrandEast Electric
Model NumberSY J-16-63.3
Official Product NameConnector with Lead (63A)
Applicable SystemGCS and MNS low-voltage withdrawable (drawer-type) switchgear
Product TypeSYJ primary plug-in contact / moving contact with lead
Equivalent StandardAvailable on request
Product StatusAvailable on request
Second / alternate model numberDF 551 016.3
Catalogue seriesSYJ primary plug-in contact series
Rated current63 A
Conductor cross-section16 mm2
Lead length as stated on the listing500 mm
Rated voltage of the SYJ series380 V / 660 V AC
Rated frequency50 Hz
Contact and conductor materialCopper
Current coverage of the SYJ series50 A to 200 A, up to 225 A depending on rating table
Series sizes offered by SYJ makersSYJ-6-32, SYJ-10-50, SYJ-16-63, SYJ-25-100, SYJ-35-125, SYJ-50-160, SYJ-70-200
Short-time withstand currentAvailable on request
Insulation voltage / creepage classAvailable on request
Country of originChina
Stated supplier on the original listingShanghai Feizhou Electric Co. Ltd
Model number on this listingSY J-16-63.3

Product Description

East Electric SY J-16-63.3 SYJ primary plug-in contact. For GCS and MNS low-voltage withdrawable switchgear. Supplied with full traceability and documentation.

In that coding the first number tracks the copper conductor cross-section and the second the rated current, so this step sits at a 16 mm2 lead paired with a 63 A contact, matching the 16 mm lead stated on this listing. The contact and the lead are both made of copper, which keeps contact resistance low and gives the assembly a long mating life as drawers are racked in and out, and the open-frame construction allows it to be clipped into the drawer rear plate without dismantling the unit. Standard SYJ parts are offered for 50 Hz circuits rated 380 V and 660 V AC, with the series spanning roughly 50 A to 200 A. This listing additionally carries a second model number, DF 551 016.3, and a 500 mm lead length, which indicate a project-specific build rather than a plain catalogue item. SY J-16-63.3 follows the SYJ coding used by Chinese switchgear component makers for the primary plug-in contacts of withdrawable function units in GCS and MNS low-voltage drawer-type switchgear.

Basic Product Information

  • Open-frame plug design so the part can be seated and clipped onto the drawer rear plate without stripping down the withdrawable unit
  • Built as the dynamic main-circuit connection of the withdrawable unit, so it tolerates repeated rack-in and rack-out cycles over the service life of the board
  • Supplied with the lead already terminated with a cable lug, removing the need for field crimping and giving a consistent connection quality
  • Sized for the common 63 A outgoing feeder drawer, one of the highest-volume ratings in Chinese GCS and MNS boards
  • Copper contact and copper conductor construction that keeps contact resistance low and limits heating at the drawer main circuit joint

Technical Specifications

Version & Model Difference

Within the SYJ range each step pairs a conductor size with a current rating, and maker catalogues list every step in two forms, suffixed I and II, so SYJ-16-63I and SYJ-16-63II denote two mechanical variants of the same 63 A contact rather than different ratings. The additional suffix '.3' seen here is not part of the published catalogue coding and, together with the second number DF 551 016.3, points to a project-specific build specified on a customer drawing. Because the two forms differ mechanically, buyers should compare the plug geometry, the fixing clip arrangement and the lead length against the withdrawn unit before ordering; quoting both numbers from the listing plus a photograph of the existing part is the safest route. Do not substitute a neighbouring step such as SYJ-10-50 or SYJ-25-100 on current rating alone, since the conductor cross-section changes with it.

Application Scenarios

  • Replacement of worn or overheated primary plug-in contacts in 63 A outgoing feeder drawers of GCS and MNS boards
  • Maintenance spares for Chinese-built low-voltage switchgear supplied by Shanghai Feizhou Electric and similar panel builders
  • Motor control centre drawers where the main circuit connection is made through SYJ-type moving contacts
  • Refurbishment of existing switchgear where drawers must be returned to service quickly without re-terminating flexible leads
  • East Electric GLBS 300 530P1 8E-24E Drawer Backboards
  • East Electric GLBS 200 523R2 8E/2 Plug-in Backboard (32A x 3)
  • East Electric GLBS 200 523R5 8E/2 Plug-in Backboard (63A x 3)
  • East Electric SY J-6-32.3 Connector with Lead (324)
  • East Electric SY 1-6-32.5 Connector with Lead (324)
  • East Electric (HANL 100 019R1) + (MNS-3-027P1) Small Interlock with Pedestals for MNS Drawers
  • East Electric HANL 200 003P1 Instrument Board (Front Plate) for 8E-24E Withdrawable Units
  • East Electric GBLS 200 523R1 32A x 3 Plug-In Backboard

Frequently Asked Questions

What is SY J-16-63.3 used for?

It is the primary plug-in contact, or moving contact, that makes the main-circuit connection between a withdrawable drawer and the vertical distribution busbar of GCS or MNS low-voltage switchgear. The 16 refers to the copper conductor cross-section in mm2 and the 63 to the rated current in amperes.

What ratings does this part carry?

The listing specifies a 63 A contact on a 16 mm2 lead 500 mm long. The SYJ series it belongs to is offered for 50 Hz circuits at 380 V and 660 V AC and covers roughly 50 A to 200 A across its sizes. Short-time withstand and insulation values are listed as available on request because they were not published either on the maker catalogue page or on this listing.

Why does the part carry two model numbers?

SY J-16-63.3 is the supplier's own ordering code and DF 551 016.3 is the second reference recorded on the project document. The same physical part can appear under several numbers when a panel builder assigns internal codes, so quote both when enquiring to avoid a mismatch with an older spares register.

How do I make sure I order the right variant?

Compare the contact form, the fixing arrangement and the lead length against the unit you are replacing, since standard SYJ parts come in I and II mechanical forms and this listing adds a bespoke suffix. Send a photograph of the existing contact together with the two model numbers and we will confirm the match before your order is released.

READY TO SHIP · 48H

Need SY-J-16-633?
Get a Quote in Minutes.

12-month warranty · No MOQ · Worldwide shipping with tracking

Request a Quote

Get the latest price, stock status and bulk order discount for SY-J-16-633. Our team replies within 30 minutes (working hours).

Get Instant Quote