East Electric MLS-4 (HANL 100 019R1)+(MNS-3-027P1) China
HANL-100-019R1MNS-3-027P1-China

East Electric
East Electric MLS-4 (HANL 100 019R1)+(MNS-3-027P1) China
East Electric (HANL 100 019R1)+(MNS-3-027P1) China MLS-4 small interlock assembly with pedestals. For MNS low-voltage withdrawable switchgear, drawers below 8E.…
Specifications
| Brand | East Electric |
|---|---|
| Model Number | (HANL 100 019R1)+(MNS-3-027P1) China |
| Official Product Name | Small interlock with Pedestals |
| Applicable System | MNS low-voltage withdrawable (drawer-type) switchgear, drawers below 8E |
| Product Type | MLS-4 small interlock assembly with pedestals |
| Equivalent Standard | Available on request |
| Product Status | Available on request |
| Component 2 code | MNS-3-027P1 (pedestals, not listed in any public source) |
| Interlock type | MLS-4 small interlock |
| Applicable drawer sizes | Drawers smaller than 8E, including 8E/4 and 8E/2 units |
| Positions provided | Connected, test, separated and isolated-lock |
| Handle rotation | 360 deg |
| Mating handle | 2B handle used together with the large interlock |
| Rated frequency quoted by the supplier listing | 50 Hz |
| Rated voltage quoted by the supplier listing | 0.38 kV / 0.66 kV |
| Protection class quoted for the assembly | IP30 to IP40 depending on listing |
| Structural form | Withdrawable, fixed by fasteners |
| Country of origin | China |
| Stated supplier on the original listing | Shanghai Feizhou Electric Co. Ltd |
| Overall dimensions | Available on request |
| Net weight | Available on request |
| Component 1 code | HANL 100 019R1 (small interlock) |
Product Description
East Electric (HANL 100 019R1)+(MNS-3-027P1) China MLS-4 small interlock assembly with pedestals. For MNS low-voltage withdrawable switchgear, drawers below 8E.
HANL 100 019R1 is dedicated to withdrawable units smaller than 8E in MNS low-voltage withdrawable switchgear, where turning the handle fitted on the drawer panel through its full rotation drives the drawer through the opening, closing, test and isolated-and-locked positions. The small interlock never works alone: it mates with the 2B operating handle and the large interlock so that the main switch can only be operated when the small handle stands at the connected position, and the small handle can only be turned once the main switch is open. That combination is what stops anyone from racking a live drawer in or out of a cubicle. One supplier catalogue groups HANL 100 019R1 under MNS 2.0 accessory parts, consistent with its use in Chinese-built MNS-type boards of the kind supplied by Shanghai Feizhou Electric. This item bundles two codes that are fitted together on one drawer: HANL 100 019R1, which Chinese switchgear parts suppliers list as the MLS-4 type small interlock, and MNS-3-027P1, recorded here as the pedestal pieces that carry it.
Basic Product Information
- Handle rotation over a full turn that walks the drawer through open, close, test and isolated-and-locked positions with positive detents at each step
Positive mechanical interlocking with the 2B handle and the large interlock so the main switch cannot be closed while the drawer is out of the connected position, and the drawer cannot be moved while the main switch is closed
- Rack-in and rack-out mechanism built from a handle hinged on the drawer front beam, a slotted guide plate fixed to the compartment floor, and the roller and locking parts linking them
- Low-effort, fast and repeatable locating of the drawer at the connected, test and separated positions
- MLS-4 small interlock dedicated to withdrawable units smaller than 8E, where space does not allow the larger mechanism
Technical Specifications
Version & Model Difference
The two codes in this item play different roles. HANL 100 019R1 is well documented among Chinese MNS accessory suppliers and is also carried under MNS 2.0 accessory ranges as the small interlock for below-8E drawers. The companion code MNS-3-027P1 does not appear in any public catalogue found, so its identity as the pedestal set rests on this listing alone and should be checked against the original assembly drawing before ordering. Within the same HANL numbering family, HANL 200xxx codes cover drawer front fittings such as handles and instrument boards, so the HANL 100 and HANL 200 prefixes address different parts of the drawer and must not be interchanged. Interlocks also differ by drawer size class, with 8E, 16E and 24E units using the large and small handle pair rather than the single handle used below 8E, so confirm the drawer height together with the code.
Application Scenarios
- Replacement of damaged or worn small interlock mechanisms on below-8E drawers of MNS low-voltage switchgear
- Maintenance spares for distribution boards in industrial plants, substations and building services risers built to the MNS design
- Panel-builder assembly of new MNS-type drawers where the interlock and pedestal arrive as one purchased set
- Return-to-service work after an electrical fault, when a distorted interlock or its mounting has to be renewed before the drawer is put back into the cubicle
- East Electric GLBS 300 530P1 8E-24E Drawer Backboards
- East Electric GLBS 200 523R2 8E/2 Plug-in Backboard (32A x 3)
- East Electric GLBS 200 523R5 8E/2 Plug-in Backboard (63A x 3)
- East Electric SY J-6-32.3 Connector with Lead (324)
- East Electric SY 1-6-32.5 Connector with Lead (324)
- East Electric SY J-16-63.3 Connector with Lead (63A) for GCS / MNS Withdrawable Units
- East Electric HANL 200 003P1 Instrument Board (Front Plate) for 8E-24E Withdrawable Units
- East Electric GBLS 200 523R1 32A x 3 Plug-In Backboard
Frequently Asked Questions
Which drawers does HANL 100 019R1 fit?
It is dedicated to MNS withdrawable units smaller than 8E, including the 8E/4 and 8E/2 sizes, where a single handle is used instead of the large and small handle pair fitted to 8E, 16E and 24E drawers. Always check the drawer height before ordering, because the interlock changes with the size class.
Why does it have to be ordered together with the pedestals?
The pedestals carry the interlock on the drawer and set its position relative to the handle and the guide plate. They are listed here as MNS-3-027P1. Because that code does not appear in any public catalogue found, the pedestal part should be checked against the original assembly drawing, or against the existing parts, before the set is ordered.
How does the interlock protect the operator?
The small interlock works with the 2B handle and the large interlock so that only two things can happen in sequence: the main switch handle can be operated only when the small handle stands at the connected position, and the small handle can be turned only once the main switch is open. That prevents a drawer being racked in or out on a live main circuit.
What should I send with an enquiry?
Send both codes shown above, the drawer size class, the quantity, and photographs of the existing interlock as fitted, including how it sits on the pedestals. Because the pedestal code is undocumented, photographs are the most reliable way to confirm the set matches, and the lead time and price are quoted once the match is agreed.
Other East Electric Models We Stock
- HANL-001R1
- HANL-100-004R1
- HANL-100-004R2
- HANL-100-018R1
- HANL-100-019R1-MNS-3-027P1
- HANL-200-001-P1-L-380mm
- HANL-200-001-P2
- HANL-200-001-P4
- HANL-200-001-PS
- HANL-200-003P1
- HANL-200-005-P1
- HANL-200-008-R1
Can not find your model? Send the nameplate photo and we will match it.
Need HANL-100-019R1MNS-3-027P1-China?
Get a Quote in Minutes.
12-month warranty · No MOQ · Worldwide shipping with tracking
Request a Quote
Get the latest price, stock status and bulk order discount for HANL-100-019R1MNS-3-027P1-China. Our team replies within 30 minutes (working hours).
